Signs & Markings

Cloverleaf Corporation stocks high performance traffic marking tape that do not require expensive equipment to install. Cloverleaf also can produce signage for your next road project. All signs and markings adhere to MUTCD standards and legends and meet FDOT requirements.


Qwick Kurb Lane Seperator

THE SAFER WAY TO HELP MOTORISTS NAVIGATE NEW TRAFFIC PATTERNS

The QWICK KURB® System addresses the need for high target vertical elements. A unique two-part vertical, with rebounding support from a double-walled flex boot, allows installation of large, formidable markers. Channelizers can be installed with heights from 28? to 43? depending on the style. Because of the reboundable flex boot’s strength and design, it can support even the Big Bollard™ that, at nearly 15? circumference, dwarfs all other round or semi-round delineators on the road today. And the elliptical Mega Marker™ can accept over 230 sq. in. of reflective sheeting per side to achieve even more night time visibility.

NCHRP 350 TL-3 Classification
Category 2 Longitudinal Channelizer | FDOT APL # 102-025-006

Qwick Kurb Lane Seperator

Manual
Product Sheet
FDOT Drawings
More
NCHRP 350 TL-3 Classification
Category 2 Longitudinal Channelizer | FDOT APL # 102-025-006
  • form-icon

  • mibile-icon


ATM Permanent Traffic Marking Tape & Symbols

QUICK AND EASY INSTALLTION: PREPARE, APPLY, ROLL!

ATM Permanent Marking Tape provides exceptional durability in the most demanding traffic conditions. Recommended for longitudinal and
transverse application in high traffic areas. The highly retroreflective tape offers superior visibility under all lighting conditions.
ATM 400’s extra thick 90 mil thick composite resists wear and provides extended life over standard highway markings. The superior ATM adhesive system minimizes tape movement.

Quick and easy installation: simply prepare the surface, apply the tape, and roll in place. A complete line of legends and symbols are available that meet MUTCD standards.


Slender bender

INCREASE THE VISIBILITY OF MIDBLOCK CROSSWALKS

The QWICK KURB® L104 Mega Marker® can be mounted on the roadway with the L54 Long Base to create more visible pedestrian crosswalks. Weighing 34 lbs, the L54 Long Base can be set-up for daily school crossings or permanently bolted to the roadway. The Mega Marker® offers high target value both day and night. Its narrow 9” panel design holds an 8” x 28” reflective decal and its single piece construction alleviates torn off sign faces after impacts. The unique Flex Boot rebounds re-rights the marker upon impact. The unique Flex Boot re-rights the marker during an impact.


Bullnose marker

INCREASE THE VISIBILITY OF CONCRETE MEDIANS

The popular L104 Mega Marker® used with the QWICK KURB® Longitudinal Channelizer System is now available for mounting on island bullnoses with the L50 base plate. Compared to conventional island mount delineators, the Mega Marker® offers higher target value—both day and night. Each side can accommodate up to 224 square inches of high visibility retro-reflective sheeting. Custom decals available. Anchoring sets & epoxy kits for concrete and asphalt are available.


  • form-icon

  • mibile-icon


ATM Permanent Traffic Marking Tape

Manual
FDOT Drawings
More
  • form-icon

  • mibile-icon


ATM Removable Traffic Marking Tape

Looking for a better alternative to paint or hot tape? Do you want the performance of thermoplastic markings without the investiment of expensive equiment? Or is waiting on your contractor to mark one crosswalk getting you down? If you answered YES to any of the above, you need preformed cold applied marking tape by ATM. Available in lines sizes from 4″ up to 30″ as well as all M.U.T.C.D. standard symbols and legends. ATM also has a full service custom marking department which can design and cut any form of horizontal signage or marking. ATM’s “top shelf” product is ATM 400 – an extra thick 90 mil tape – the thickest cold applied tape on the market today. With two series of permanent grade and two series of removable grade approved by FDOT, ATM’s traffic marking tapes will save you time and money. Just peel, stick and roll – a professional look everytime!


ATM Removable Traffic Marking Tape

Manual
FDOT Drawings
More
  • form-icon

  • mibile-icon


ATM Hide-A-LANE BLACKOUT Marking Tape

ATM 280 Hide-A-Line installs quickly and easily over existing markings and eliminates costly removal of permanent road markings. The non-reflective, matte black color blends with asphalt surfaces providing an effective mask day or night. The pre-applied, pressure-sensitive adhesive extends the application season typically shortened by marginal weather conditions. Quick and easy installation: simply prepare the surface, apply the tape, and tamp in place. When the job is completed the reinforced fabric backing makes removal easy. Marked roadways can be opened to traffic immediately. ATM 280 Series is available in a variety of roll widths.


ATM Hide-A-LANE BLACKOUT Marking Tape

Manual
FDOT Drawings
More
  • form-icon

  • mibile-icon


ATM Temporary Rumble Strip

Alert drivers and slow traffic without the added time and expense of installing thermoplastic, asphalt or grooved rumble strips. ATM rumble strips are 250 mils thick, 4″ wide and are available in 90′ rolls with pre-applied adhesive. Available for permanent or temporary applications in either white or black. Just peel, stick and roll – it’s that simple!


ATM Temporary Rumble Strip

Manual
Product Sheet
FDOT Drawings
More
  • form-icon

  • mibile-icon


Marking Accessories

Barrier Reflectors

Get A Quote

Glare Screen

Get A Quote

Guardrail Reflectors

Get A Quote